Tips For Replacing a Window Handle
The replacement of your window handle is a simple project that can be accomplished in the convenience of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Begin by removing the screw covers to reveal the screws within the uPVC window handle. Take a measurement of the spindle to be sure you're getting the correct size replacement.
1. Measure the Spindle Length
It is crucial to have the right size spindle when replacing windows handles. It could affect the tightness or looseness of the handle as well as whether the handle will lock properly into the window frame. The spindle is a metal shaft that connects to the handle and the lock within the frame of the window. The spindle is available in the standard 8mm industry cross-section or the older versions that measure 9mm. The modern industry standard is 8mm, but this was not always the case. When purchasing a new handle, it is essential to verify the measurements.
Take the handle off. This is done by turning the handle in the open position, and unwinding two screws that hold the handle in place (which are usually hidden behind plastic caps which must be removed). Once the handle has been removed, measure the distance from the base to the point at which it ends. This will give you the measurement needed to purchase a new one.
There are many options to consider when selecting the right window handle from sleek chrome that can fit into modern homes to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more traditional Tudor cottages with curled monkey tail locks! The possibilities are endless, but the most important thing is to select a style that is suitable for your home.
Espag handles are generally installed to uPVC windows and are the same size with 43mm centres (2 fixings). door handle replacement high-wycombe Repair My Windows And Doors handles range from 58mm to 62mm but luckily there are replacements available for both sizes. Cadenza window handles have an entirely different dimension as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.
Another consideration when selecting a new window handle is determining what hand you will need to use. This is determined by the hand you use to open the door. Inline espag handles can be used for left or right-handed windows. Cranked window handles are handed and are only used on windows that open in one direction.
2. Take the handle off
A window handle that falls out can be a hassle, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can repair the uPVC handle yourself. All you need is a few basic tools and some time to complete the job.
You must first open the window, and make sure it's not locked. The next step is to remove the screws that hold the handle in position. Once these are removed, you are able to work on removing the handle itself.
The handle itself is fixed to a spindle within the window frame. Based on the type, this is held in place by a screw or a pin. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these types of handles are utilized on casement windows, which includes aluminum windows. The handles can be locked by using a key to block access by unauthorised persons from outside. You can also lock the handles by turning them clockwise.
To remove the handle, you will need a flat-bladed screwdriver. Once this is released, the handle will slide off the spindle. Once the old handle is removed, you'll have to take a measurement of the length of the spindle to ensure that the new handle will fit.
Once you have decided on the correct size for the handle, you can screw it into the correct position. It is essential to make sure that the handle is securely fastened and that it is rotating in the correct direction (clockwise when the handle is open and counterclockwise if handle is closed). It is also crucial to check that it is not fitted upside down.
Replace the screw caps. After you have completed this step, you are able to test the handle to be sure it is working correctly. You should also test the locking mechanism by moving the handle from the locked position and then back again.
3. Take off the Screws
A uPVC handle is a crucial component of any house and is the first item to show signs of wear or damage. This could be due to natural elements or by frequent use, and sometimes intentional damage caused by criminals who might wish to open a locked window to gain access to your home. A simple fix can resolve the problem and prevent it from occurring again.
UPVC handles can also be difficult to remove if the locking mechanisms are not working properly. Most of the time, the issue can be resolved by replacing the multipoint lock instead of the entire handle. It's definitely worth a look because it could save you money.
After you have removed the handle, you'll need to take off any screws that held it in place. These are typically located on the inside face of the base. You may need to use a screwdriver to accomplish this and it's essential to not over tighten as this can cause the handle to loosen.
Then, you'll need to find the pins or screws that secure the handle. Again these are likely to be located on the inside face of the handle base and you'll need either a screwdriver or pair of pliers in order to remove the screws. After you have removed them, you'll be required to replace the screw caps should you choose to do so, and then test the new handle to confirm that it's working correctly.
Install the handle by adjusting the spindle to the cutout in the window mechanism. Then, screw it in. If you wish to replace the screw covers, make sure the handle is in a position that is open and any screws are securely attached. Then you can enjoy the new window handle. I hope this will enable you avoid the need for expensive window and door replacements in the future. If you'd like to get assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the New Handle
The process of replacing a broken window handle or updating it is easy and can be completed within a few easy steps. The most important thing is to identify the type of handle, determine its spindle, and determine what tools you will need to complete the task. Always ensure the safety of your windows and tools. Take your time to follow the steps and make sure that you have a handle that is safe to use.
The first step is to locate the screws that hold your current window handle and remove them, while keeping an adequate grip on the handle to prevent it from crashing and causing injury. After the screws have been removed and repositioned, they can be put in a safe place to be replaced later.
After removing the old handle, you can now begin to put in your new one. The handle should be perfectly positioned in order to function correctly and hold the window in its closed position. Then, slide the metal bar that is square on the handle into the hole for the window mechanism.
The final step is to replace the caps on the screws and test the handle to make sure it is working. If you're not happy with the results, or the window doesn't open and close properly Contact our experts for help.
Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point due to damage or wear. Anyone with a little DIY experience can easily complete the task. The most important factor in the success of this procedure is to ensure that you're using a handle that matches the existing window in terms of size and design. If you're not sure about the type of handle you need, feel free to get in touch with our team who will be able to help you navigate the various options available.